| DESIGN FEATURES |  | Designed and Manufactured to ISO 9001:2000 |  | TUV Approved |  | Corrosive resistant materials, electro-plating and epoxy paint systems used to prolong life. |  | Intelligent design to give maximum ground clearance availiable on all caravans. |  | Easily transferable to a new or upgraded caravan. |  | Easily installed at your home or storage site. |  | Our fully trained installation engineers will fit the Powrtouch at your home, storage site or in any safe working enviroment. |  | Fully comprehensive DIY Instructions available for the competent person. |
| PERFORMANCE FEATURES |  | Works on all terrains including wet/muddy ground, gravel and soft surfaces. |  | Heavy Duty movers available for larger single and twin axle caravans. |  | Uniquely sensitive soft start to allow millimetre accuracy in caravan positioning. |  | Additional back up cable supplied to use should radio interference be experienced. |  | Low battery indicator lights on the handset for both the handset and the caravan batteries. |  | Powrbar (cross actuation available) for single sided engagement of rollers. |
| | SAFETY FEATURES |  | For your safety and isolation switch is fitted to prevent accidental use of the Powrtouch and also to prevent battery power drain when not in use. |  | For additional safery there is an automatic 20 minute power cut off should the isolation switch be in the on position for 20 minutes and the Powrtouch is not operated (use isolation switch to reactivate). |  | Unique two button switch on handset to prevent accidental activation. |  | Built in motor overload protection (current & temperature). |  | Automatic braking occurs immediately the buttons are released. |
| GUARANTEE FEATURES |  | Supplied with a FIVE year no quibble guarantee. |  | Supported by a fully trained technical department at the factory and a UK wide Powrwheel Limited trained team of independant installation engineers. |  | Work under guarantee is carried out at your home, storage site, holiday venue (UK only) or you can visit our factory in Christchurch, Dorset. |
| ENGINEERING FEATURES |  | If you have a non standard caravan chassis or car/commercial.industrial trailer that you would like to have a Powrtouch fitted then with our unique (to the caravan mover business) engineering experiance we will survey the unit and design a bespoke fitting system that will allow a mover to be installed. If in doubt talk to the UK's number one Caravan Mover installer. |
|